mud plug

[XVII]

Any tips on keep a foam mud plug stuck in a non beadlock wheel? Thanks.

[billetbirdcage]

It helps if you cut the center of the foam ones out where the center of the hub goes, usually a 4 to 5" circle about 2 to 3" deep will do the trick.

The best way would to get a couple of the rings that expand and lock against a non bead wheel and then allows you to use a alum cover like a bead lock. Dura-lite has them.

[claybuster]

I dont know if it helps but I cut a slit in the side and then put the stem at that spot. Also to keep stem from being bent and possibly causing a leak. So far havnt lost one except when we cut a tire.